ARSC HPC Users' Newsletter 221, June 6, 2001

Brown Bag Lunch with Don Morton

Marking the return of Arctic summer, Don Morton arrives next week from the University of Montana for his annual visit. Like the geese, sandhill cranes, trumpeter swans, and various ducks (who proceeded him by 6 weeks), he's flying in, apparently too busy to drive anymore.

It's just not like the old days...

Please join us for a Brown Bag lunch with Don. If it's sunny and over 50 degrees F, we'll eat outside.

Wednesday, June 6 12:00-1:00 Butrovich Building

Topics to discuss with Don:

  • ARSC summer internship program
  • AGN (Access Grid Node) activity and teaching
  • EPSCoR (Experimental Program to Stimulate Competitive Research)
  • Collaboration between ARSC/UAF and UM

ERDC Technical Reports

If you feel like browsing a nice collection of HPC related papers, you might visit the ERDC DSRC's web site:

http://www.wes.hpc.mil/index.htm

The site uses HTML frames, so I can't give you the actual bookmark. To navigate to the technical reports, click on "Publications" / "Technical Reports". Here's a very short sample of the available titles:

01-05 Performance Comparison of SGI Origin 2800 and SGI Origin 3800 on Application Codes Jeff Hensley, Daniel Duffy, Mark Fahey, Tom Oppe, William Ward, Robert Alter

01-04 FORTRAN 77 to FORTRAN 90 Source Code Conversion and Maintenance Tools Richard Weed

01-01 Emulating Co-Array Fortran with Pthreads Richard J. Hanson, Stephen F. Wornom

00-38 The Effect of Wave Propagation Scheme on SWAN Nearshore Wave Predictions Stephen F. Wornom, David J. S. Welsh, Keith W. Bedford

00-35 Using OpenMP and Threaded Libraries to Parallelize Scientific Applications Daniel Duffy

00-34 Tools for Understanding Program Performance John Mellor-Crummey

There's a second section of reports under "User Guides, FAQs, and Documentation" / "Technical Publications".

CUG SUMMIT

The Cray User Group's annual SUMMIT conference was held May 21 - May 25 at a resort hotel in Indian Wells, CA. Here are brief excerpts from Liam Forbes' and Tom Baring's CUG reports, starting with Liam's.

Monday 5/21/2001 AM

General Session
  Corporate Direction - Jim Rottsolk, CEO, Cray Inc.
  2 current products - T3E, SV1
  3 new products - SuperCluster, MTA-2, SV2
  most research resources going into SV2 development
  Focus & Resources
    - catch up for T90P, T3F cancellations
    - support multi-architecture customer base
    - participate in market mainstream
    - resume innovation
  Leading Innovations
    deliver real-world sustained performance
    customize for greater performance & usability, but leverage 3rd party
     technology
  New Products
    SuperCluster - T3E via COTS follow on
    SV1ex
    SX - classic high-end high-bandwidth vector system (NEC)
    SV2
    MTA-2
  NEC Agreement
    10 year distribute & support vector products
    exclusive North America, non-exclusive rest of world
    Cray absorbs HNSX operations
    $25M non-voting investment in Cray (received)
    lift anti-dumping (5/3)
    no IP transfer
    reinvigorate vector market, especially in US
    add revenue growth opportunity
    leverage Cray sales/service
    apply cash investment to Cray R&D and operations
Thursday 5/24/2001 AM

Corporate Direction - Bob Bishop, CEO, SGI
  "Visualization will always be the key to enlightenment."
  Focus on "big data"
  Over 450 Reality Centers installed worldwide - the "spearhead" of SGI products
  MIPS/IRIX platform is "critical to the future of SGI.  It's at the core of
   SGI's visualization capabilities."
  Now shipping over 10K processors for O3K & Onyx3 systems
  "We will be the first company that puts to the market a TeraFLOP single
   system image machine."
  Itanium & Linux are complementary to MIPS/IRIX.
  May 29 - announcements about Itanium products;
  7,400 employees including temps and contractors, intend to bring it down
   to 6,000
  expect to break even and be cash neutral within the next 90 days
  Jan Silverman, Senior VP Sales & Marketing, SGI
    Committed to deliver products and solutions to Technical & Creative Customers
    Increase the rate of performance & price/performance of MIPS/IRIX
    Limited release of Itanium 1 systems due to close follow-on of McKinley
    Decrease our investment in non-differentiated commodity type products
     ex: no Pentium 4s to follow Pentium 3 products, focus on Itanium
    New marketing strategy
Technology Direction - Eng Lim Goh, VP & CTO, SGI
  Focus on low latency - high bandwidth systems
  Design goal is to reduce the "latency profile" of large systems
  SN-2 MIPS R18K
    48bit physical address space
    256TB max memory addressable for entire SSI system
  Build and sell high performance clusters comprising the largest nodes in
   the industry (512P, 1TB) while sustaining a lead of 4x the competition
   in order to provide the ease of shared memory programming if required
   and run the fastest MPI programs if not required.
  "The fastest computer needs to be the smallest."
  Build and sell high performance graphics systems which address the
   performance graphics and the feature graphics segments separately,
   but competitively differentiated by their high degree of integration.
  This fellow should have had the majority of speaking time in this session.

Hardware Update - Dave Parry, Sr VP High Performance Systems, SGI &
  Jan Silverman, Sr VP Marketing
  Shipping
    O3K 128P -> 256P -> 512P
    Onyx3000
    500MHz (R14K) processor
    GSN for Origin & Onyx
    TP9100 & TP9400 storage solutions
    Octane2
      V6/V8 -> V10/V12
      dual channel display option
  Processor Roadmap
    2001 - R14K 500MHz, 1 GFlop
    2002 - R14KA 600MHz
    2002/3 - R16K 700MHz, 1.4 GFlop
    2003/4 - R18K(N1) on cache secondary cache (1MB cache on chip),
      fused multiply add unit (4 flop/cycle), 800MHz, 3.2 GFlop
    long term commitment to MIPS/IRIX
    no recompiling IRIX binaries
    upgrade at own place
    new processor every 9 - 12 months
    two processor frequency options always available
  HPC Platform Roadmap
    Origin200 - R12KS
    "Speedo2" - R14K -> R16K -> R18K
    O3K/O3K - R12K -> R14K -> R14KA -> R16K -> R18K
    Nextgen Node - ?? - follow on to O3K
    SN-IPF - Itanium -> McKinley -> Madison
    NUMAflex I/O - XIO/PCI -> PCI-X -> Peer IO -> IFB 12x?
    NUMAflex Fabric - NUMALink3 -> NUMALink4 -> NUMALink5
[ From Tom Baring's report] Monday am

David Kiefer: Cray Inc.: Hardware Roadmap/Update
  T3E
    Limitations are due to technology and agreement with sgi
    Did upgrade proc to ev5.6... clk 675mhz... pk perf: 1350 mflops

  SV1
    SV1 300mhz/ 22 gb/s  mem bandwidth
    SV1e processor  500mhz / improved cache
    SV1ex 48 gb/s sust. Mem bw, 32 or 96 gb internal ssd

  SV1e Processor
    processor and cache on same chip.  500mhz.  Still 256 kb cache
    "X" memory: 1.5 - 2x sus mem bandwidth  1.25-1.6x single cpu bw improvement
    SSD:  30 gb/s bw: highest ever offered

  SV1e delivered and in operation (at ARSC)
  SV1ex mem in validation... deliver in q3

  Supercluster
    SC's need t3e like features
    SMP nodes w/ 2 x 833 mhz alphas

  MTA-2
    highly-scalable
    256 procs max
    each proc 128 instr. streams / different hardware stream activated each clk
    shared mem model: each proc can access arbitrary locations
    25 active streams per proc / Overlaps mem latency
    up ot 1tb mem 
    25.6 gb/s sys io bandwidth
    friendly to programmers.

  SV2
    Big departure in vect arch... t3e-like scalability
    64 and 32 ieee arith
    128 v regs, 512 scalar/address regs per cpu
    status
      initial node module powered up and in test
      OS/PrgEnv running well in simulators

  challenges 
    Differentiation : Bandwidth, sustained performance 
    Improve devel cycles 
    Lower devel cost

Product classes
  Distributed shared memory
    SV2

  Distributed memory
    T3e
    SC

  Uniform shared
    SV1
    MTA

Roadmap
  SV1ex relies on locality (cache) for perf... SX5 is more traditional,
  (no cache) vector system. SV1ex ends 2003 when SV2 established.

Quick-Tip Q & A



A:[[ I've inherited a Fortran program which uses implicit variable typing,
  [[ and has problems.  As the new "maintainer" of this program, I need to
  [[ clean it up.
  [[
  [[ First, I plan to insert IMPLICIT NONE directives in every file and
  [[ write explicit declarations for every variable.  Is there an easy way
  [[ to do this, or do I need to go through the code line-by-line?



  Cray's Fortran compiler has excellent listing options. If you ask, it
  will generate reports which show all variable names and where they're
  declared, set, and referenced (even when they're "declared"
  implicitly).  

  If a variable name has been misspelled, accepted by the compiler as an
  implicit declaration, and thus not reported as an error, this mistake
  will still show up in a report (see below).  Try:

    f90 -r4

  Adding IMPLICIT NONE will make these mistakes show up as the errors
  they are.  Back to the original question...  this option:

    f90 -rx

  can simplify the process of rewriting the code. The "-rx" report will
  tell you which variables are being implicitly typed and their type.
  You could simply edit the report to generate Fortran code or write a
  perl script to automate this editing. Of course, this is your chance
  to clean things up, too.

  What follows are snippets of output from these two types of Cray
  reports.  The object of the reports was an otherwise correct Fortran
  source file to which the following line was added:

         YYY = ZZZ

  The accepts this as an implicit declaration of two reals, YYY and ZZZ:


  From: f90 -r4
  ==================================================================
   Cross-reference map:   95 Identifiers (197 References)

   Type
      Kind  Usage  EqDSv Offset  Home      Name
      References -------  -----  ----- ------ ------
   ------                -------------- Real  8 Scalar    -        0
   Stack    YYY                  31= Real  8 Scalar    -        0
   Stack    ZZZ                  31


  [ ... cut ... ]


    Identifier characteristics report:  88 Variables (2 with F90
    attributes)

      Name            Attributes ------         --------------
      YYY           Type=Real, Kind=8, Scalar 
      ZZZ           Type=Real, Kind=8, Scalar


  [ ... cut ... ]


   61 ftnlint messages
        60) <4> Local Variable "YYY" is assigned a value but never used
        61) <3> Local Variable "ZZZ" is used but never assigned a value


  [ ... cut ... ]


   f90 Compiler - 6 messages:

     1) <cf90-7212,Warning,Line=31> Variable "ZZZ" is used before it is
     defined.


  From: f90 -rx
  ==================================================================
  (the numbers show lines on which given variables were declared, set,
  or used. )

  BFCT                                                  
                                   INTEGER, PARAMETER
    Decl      25
    Set 
    Used      40      45      46

  BLKEND                           Stack                
                                   INTEGER
    Decl      26
    Set       46
    Used      47      49      55      56      59      66      67

  YYY                              Stack                
                                   REAL, Implicitly typed
    Decl
    Set       31
    Used

  ZZZ                              Stack                
                                   REAL, Implicitly typed
    Decl
    Set 
    Used      31



  IBM's xlf compiler can generate similar, though less friendly,
  reports.  Try these options:

     xlf90 -qsource -qxref=full

  SGI's f90 compiler seems to lack similar capabilities. (Send us a note
  if you know otherwise.)




Q: I share lots of big data files with my group, using regular Unix
   permissions.  Most of the files have been DMF migrated off disk and
   onto tape.  Quota is applied to disk files, but not migrated files.

   DMF makes it really easy for one person to manage his/her files, as
   the commands are easy, and storage is basically unlimited.  The
   problem I have is that group members can "dmget" my files as needed
   (which is what I want) but they can't "dmput" them when they're
   through.  At the moment, group members are sending me email when I
   need to re-migrate a file they've used, but it's inconvenient and I
   keep hitting my quota unsuspectingly.

   Any suggestions?

[[ Answers, Questions, and Tips Graciously Accepted ]]


Current Editors:
Ed Kornkven ARSC HPC Specialist ph: 907-450-8669
Kate Hedstrom ARSC Oceanographic Specialist ph: 907-450-8678
Arctic Region Supercomputing Center
University of Alaska Fairbanks
PO Box 756020
Fairbanks AK 99775-6020
E-mail Subscriptions: Archives:
    Back issues of the ASCII e-mail edition of the ARSC T3D/T3E/HPC Users' Newsletter are available by request. Please contact the editors.
Back to Top